Jeeves Wall Mount Electric H Curved Towel Warmer Finish: Polished

You looking to find the "Jeeves Wall Mount Electric H Curved Towel Warmer Finish: Polished" Good news! You can purchase Jeeves Wall Mount Electric H Curved Towel Warmer Finish: Polished with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $282.35    

Product Feature

• Bars Ideally spaced to hold large and small towels.
• 7 Crossbars
• Keeps towels and bathrobes warm and dry
• Customer sizes are available by special order

Product Description

HCP-20 Finish: Polished Features: -Towel warmer.-Material: Stainless steel.-High quality.-Classic towel bar with gentle curve.-Safety cut out temperature: 158 ° F.-Can be wired on left side for an extra charge.-Keeps bathroom warm, mold and mildew free.-Bars ideally spaced to hold large and small towels.-Custom hydronic models are available by special order.-242 Degrees F integrated security thermofuse adds additional safety.-Can be controlled by a simple on/off switch or an optional 24 hr/7 day programmable timer.-Average temperature range: 145 ° to 154 °F. Includes: -Includes a built in thermostat and internal thermal cutout for optimal energy consumption and safety. Construction: -Warranty: 5 Years on the construction of the unit; 2 years on the heating element. Specifications: -Standard voltage: 110 Volts. Dimensions: -18'' H x 20.5'' W x 6.5'' D, 11 lbs. Collection: -Jeeves collection.

Jeeves Wall Mount Electric H Curved Towel Warmer Finish: Polished Review

I purchased this heated towel bar recently and want to share my feelings with others who might consider this item. First of all, the bar heats up and works well. While it is large enough for many towels, you'll notice the manufacturer's pictures show a single towel or two very neatly folded towels on the rack. That's not likely to happen unless you and your spouse are very anal. Here's where I have gripes. The installation manual is nearly useless and the website doesn't offer much help either. One particular problem is that often the rack will be mounted on a wall that is both tile and wallboard. The manufacturer gives you no method of allowing for the difference except to say that you can use washers against the wallboard to "push" the mounting legs out. This will insure that the rack is parallel to the wall. The problem is that the washers are not covered and would look unsightly. I had this problem and had to deal with 1/2-inch height difference between the tile and the wallboard. Here's what I did and this is why the installation is so hard. I cut 1/2" from two of the mounting legs. This required me to cut 1/2" from two mounting bolts as well and the re-drill and tap two holes for set screws that are used to hold the mounting legs on nylon posts attached to the wall. Go to Amba's website and open the mounting manual to see what I am speaking of. The last difficulty is that for old construction, finding studs, in the right position to attach the nylon mounting bushings is impossible. I elected to use 1/4" toggle bolts. They worked very well, but the problem here is that the hole drilled to pass the toggle bolt through the wall is nearly the same diameter as the as the nylon mounting bushing. I solved that by placing a 1" fender washer (Ace Hardware) between the mounting bushing and the wall. Additional advice. Mount the wall power box first. Attach the mounting plate (supplied) and put the whole bar up against the wall. Level the whole thing and have an assistant draw pencil lines around the four mounting legs where they touch the wall. This way you will accurately put the mounting bushings in the correct spot. Finally, I controlled the whole thing with a seven-day GE wall timer. I have the bar turn on about an hour before I'm likely to shower. I have it stay on for 3 hours. This way the towel is not only warm when I need it, but secondly it helps dry the towel when I'm done. If you can make sense of what I've suggested, you'll have a very professional looking installation. Oh I forgot to say that you might need to cut through ceramic tile as I did, for the electrical box and two of the four mounting holes. I used a tile cutting Dremel bit available at HD, Lowes or most hardware stores. Good luck!

Most of the consumer Reviews tell that the "Jeeves Wall Mount Electric H Curved Towel Warmer Finish: Polished" are high quality item. You can read each testimony from consumers to find out cons and pros from Jeeves Wall Mount Electric H Curved Towel Warmer Finish: Polished ...