21-ft. Round Overlap Above Ground Pool Liner - Boulder Swirl - 20-Gauge
Price:


Product Feature
- 15 Year Warranty
- 20 gauge virgin vinyl material
- For flat bottom pools with 48 in. to 52 in. sidewalls
- Features strong double welded seams
- Provides maximum protection from the sun's damaging UV rays
Product Description
This premium virgin vinyl pool liner provides maximum protection against the sun's damaging UV rays so it will last longer and maintain a beautiful appearance for years. The rugged double welded seams will withstand winter's worst. Overlap-style liner is made for flat bottom pools with 48 in. to 52 in. sidewalls.21-ft. Round Overlap Above Ground Pool Liner - Boulder Swirl - 20-Gauge Review
This review has nothing to do with any seller and wasn't sure how to rate this product itself. I just wanted to warn those consumers with pool walls over 48".We purchased this liner because it states that it can be used for up to 54" wall pools. Some say 52" but manufacturer says 54".
We have a 52". What the manufacturer is figuring in is that you install 2" of sand (not liner pad) and 6" coving. They are not figuring if you put your walls on top of sand either vs sand inside walls. None the less, we did exactly what the manufacturer has in their figures for their liner (not knowing). The liner for our 52" wall was very, very tight and short. It pulled down our walls at first attempt. We had to use bungy cords to strap walls to ground to prevent that from happening again (we probably should have done from the start). We finally got liner in place and was very disappointed in the lack of overlap over the wall. When we filled with water, liner pulled from wall. I called manufacturer and basically was told it was our error. The rude gentleman told me that the liner is 53.5" and with 2" of sand, should have plenty overlap, and that the liner is made to be tight... Which made my claim even more legitimate as claiming it's NOT LONG ENOUGH. We decided to attempt again with manufacturers lack of support. We measured 1.5" of overlap all around the pool, put the plastic pieces on, along with pieces that go on top of those, made adjustments inside pool to liner to almost perfection. Again, after adding 6" of water, it started pulling in a couple of areas, reducing the 1.5" overlap. We then decided to duct tape liner to wall all the way around and wait till the next day with hot sun beating in these tight areas in order to make them stretch. Thankfully it has worked. This is a beautiful liner and do not believe people are having issues with the 48" walls at all. However, the 52" is not easy to install and takes a lot of patience with very little room for error. I do not see how in the world it could work with a 54" wall at all. We've installed 2 liners in past and have never ran into this situation. Normally have atleast 6" of overlap to play with. Because we learned this liner was not EASY TO INSTALL like the manufacturer advertises on website, it delayed our installation by 3 days. Ridiculous. So those of you that have 52" wall, just know it will work if you do as we have done, unless you use more than 2" of sand and 6" of coving (could make easier). Good luck..it is a beautiful liner.
Most of the consumer Reviews tell that the "21-ft. Round Overlap Above Ground Pool Liner - Boulder Swirl - 20-Gauge" are high quality item. You can read each testimony from consumers to find out cons and pros from 21-ft. Round Overlap Above Ground Pool Liner - Boulder Swirl - 20-Gauge ...

No comments:
Post a Comment